Permanent folding top

[Buzz]

Found some pics in the members galleries. This top was designed and built by CC member Rick Young who later changed his forum moniker to CRZN427. He had a waiting list for these tops at one time. Not sure of his current status. Probably more info available on the FFR forum. As you can see the tops erected and stowed in front of the roll bar and the rigid side windows had a clever linkage that flipped them outward when the door was opened. If I recall correctly, no body modifications were required.

[Luce]

I thought I was the only one with the soft top looking hard top. Mine will be covered in cloth or vinyl, not sure yet.

Here's some construction photos

I hand bent 1/2" EMT and tack welded it together, stretched canvas drop cloth over it, sopped it in epoxy, then glassed it.

I have since added the cutout for a oval rear window, and channels for the side curtains, but don't have pics here at the office.