footwell insulation

[CHANMADD]

I have a padding with silver paper on one side and the padding on the other. I glued this shiny side out all around the engine compartment and footwells. It does not look the prettiest, but,hey, its pretty cool in the cabin!!

[ACBill]

I used a combination of Dynaliner, and two sided aluminum foil backed insulation. The 1/2" Dynaliner I used on the floors on top of the insulation, and under the carpet. The foot box front and sides, I just used the insulation material, and carpeted over it.. All seams were covered in DEI Heat tape.
In addition to this, I added an aluminum "stand-off plate" at the front of the foot box directly behind the headers. Small sections of aluminum tubing were used as spacers, and it was attached with machine screws and lock nuts.

I'm very happy with the results. Even on the hottest days of summer, my feet stay plenty cool.