
02-08-2016, 10:31 PM
|
|
Banned
|
|
|
Join Date: Sep 2015
Cobra Make, Engine: Rowan Replicars, 352 4V
Posts: 94
|
|
Not Ranked
Big Brakes
I have Sierra 4 pot calipers on the front with 1.85" and 2" pistons; I am using GM metric calipers on the rear.
With this combination I am running a Ford LTD/Crown Victoria master cylinder (1" Bore). My problem is that I have no brake pressure, the pedal goes right to the floor. I have bled the brakes about twenty times an don't think there is any air in the system, I also bench bled the master cylinder. This has me totally stumped; I have built many brake systems and have never come across a problem like this.
Can this problem be related to the MC I'm using, could it be too small.
What MCs are you guys using with big brakes?
Last edited by pormgb; 02-08-2016 at 11:08 PM..
|