Shelby carbon fiber 427 SC Cobra

[rodneym]

Gary,
IIRC, they were set to do 10 but only did one [confirmed in Registry, pg 713]. Also, that was years and years before this build.

Cobra427,
HST did complete cars but supposedly for out of country delivery only. Don't recall about this one. There's quite a bit of what us hobbyists would call 'strange dealings' with some CSXs, particularly HSTs. Like warehouses with built and unbuilt cars, offers of unsold rollers, 'deals' from quasi private parties (investors), etc. You know, regular stuff around this hobby.

[DanEC]

Sounds like he needs to step the idle speed up a tad.

[Buzz]

I notice he pulled front first into the parking spot and shut down quickly instead of taking the time to back in like most of the other cars. My guess is it was running very hot and possibly on the verge of stalling.

The collectors on those pipes are way too long, holding them too far out from the body. Maybe someone was afraid of cooking the carbon fiber bodywork. Easy fix tho - still a nice looking car.

[joyridin']

Originally Posted by Buzz

I notice he pulled front first into the parking spot and shut down quickly instead of taking the time to back in like most of the other cars. My guess is it was running very hot and possibly on the verge of stalling.

The collectors on those pipes are way too long, holding them too far out from the body. Maybe someone was afraid of cooking the carbon fiber bodywork. Easy fix tho - still a nice looking car.

I am assuming the end of the video shows him leaving. The car idles a lot different in that section of the video than when he pulled into the lot.

[DanEC]

Originally Posted by joyridin'

I am assuming the end of the video shows him leaving. The car idles a lot different in that section of the video than when he pulled into the lot.

Yeah - sounds a lot better when he is leaving at the end.

[RodKnock]

Originally Posted by DanEC

Sounds like he needs to step the idle speed up a tad.

I agree. Too low for me too. Maybe it was the poor sound of the video camera, but I thought it didn't sound well. Also, I don't like the "Paris-to-Dakar Rally" ride height. And the headers being held off the body would drive me nuts.

Other than that, nice car.

[Silversmith]

Speaking of idle, csx 2058 loped sorta like 782 but only slower.. The lope was so slow that the alt light would begin to show @ each low end of the stroke. That is till you blipped the throttle. The response was instant! That was a thumping little 260

[twobjshelbys]

Originally Posted by rodneym

Gary,
IIRC, they were set to do 10 but only did one [confirmed in Registry, pg 713]. Also, that was years and years before this build.

Cobra427,
HST did complete cars but supposedly for out of country delivery only. Don't recall about this one. There's quite a bit of what us hobbyists would call 'strange dealings' with some CSXs, particularly HSTs. Like warehouses with built and unbuilt cars, offers of unsold rollers, 'deals' from quasi private parties (investors), etc. You know, regular stuff around this hobby.

Mine was one of the 7 carbon fiber cars. All were built by HST. HST's complete cars were all suffixed with LA (Latin America, e.g. mine was CSX4005LA) and were built specifically for some customers in Mexico City. Two of that batch were CF cars.

[gsharapa]

Originally Posted by rodneym

Gary,
IIRC, they were set to do 10 but only did one [confirmed in Registry, pg 713]. Also, that was years and years before this build.

Cobra427,
HST did complete cars but supposedly for out of country delivery only. Don't recall about this one. There's quite a bit of what us hobbyists would call 'strange dealings' with some CSXs, particularly HSTs. Like warehouses with built and unbuilt cars, offers of unsold rollers, 'deals' from quasi private parties (investors), etc. You know, regular stuff around this hobby.

There was one at the Shelby Legacy Bank show this July so maybe that was the 1st one but I thought they built 3 of them in total. Next time I see Bill Neale I'll ask him.........

[fordracing65]

Why is the rear license plate off to the side and not in the middle of the trunk...

[rodneym]

Gary,
I was going by the info in the latest registry. There may be more but I've got my reservations about this CSX4954 being one.

Tony,
I'll post a link to this Cobra's plaque when I get home. There's no 'LA' on the number

[CSX3183]

Man that cam is perfect, that's music to my ears, reminds me of what I had in 3183. The idle is set perfectly, if that motor don't sound bad to you, your living in a dream world.

Barely able to stay running, you can hear each cylinder firing, now somebody get me that cam info, so I can duplicate that sound.

[twobjshelbys]

Originally Posted by CSX3183

Man that cam is perfect, that's music to my ears, reminds me of what I had in 3183. The idle is set perfectly, if that motor don't sound bad to you, your living in a dream world.

Barely able to stay running, you can hear each cylinder firing, now somebody get me that cam info, so I can duplicate that sound.

I loved that lopey sound too. My engine was the same, but fuel injected and it took a while to get it to work at 6000' but once it did, it was great. I am going to do an X-pipe on my Ford GT so it might sound a little more like the Cobra. I don't want to hear it, I want to feel it

[twobjshelbys]

Originally Posted by rodneym

Gary,
I was going by the info in the latest registry. There may be more but I've got my reservations about this CSX4954 being one.

Tony,
I'll post a link to this Cobra's plaque when I get home. There's no 'LA' on the number

I wasn't saying that all of the CF cars were Mexico cars, only that two of the LA series cars were. This is my recollection from the registry. I believe another one or two CF cars were produced after the registry.