02-27-2016, 11:05 AM
|
 |
CC Member/Contributor
|
|
|
Join Date: Feb 2000
Location: Greenville,
SC
Cobra Make, Engine: 70 Shelby convertible, ERA-289 FIA, ERA 289 roadster hybrid, mystery Ford powered 2dr convertible
Posts: 12,798
|
|
Not Ranked
Quote:
Originally Posted by cycleguy55
What size would you recommend for mounting on the rear bulkhead, between the seats? Any other recommendations or suggestions?
|
3 liter system with bottle mounted in the trunk. Actuator only to be mounted in the passenger compartment, along with at least one of the three nozzles. 1 nozzle in the engine compartment on the firewall pointed towards the top of the engine and fuel supply, one mounted at the rear where the fuel supply leaves the tank.
Quote:
Originally Posted by Bernica
|
Bottle (3 liter) is mounted in the trunk. Actuator handle needs to be installed in an area readily accessible from the drivers seat with you full strapped in. Unless you are going with an automatic set up (it is my understanding it uses a temp sensitive, burn through actuator in the engine compartment), if you cannot reach the handle, then it is useless.
Bill S.
__________________
Instead of being part of the problem, be part of a successful solution.
First time Cobra buyers-READ THIS
Last edited by mrmustang; 02-27-2016 at 11:09 AM..
|
6Likes
Threaded Mode
