Height from pan rail to carb, 385 compared to a FE

[cycleguy55]

Not exactly what you're looking for, but here's a start: http://mustangsandmore.com/ubb/EngineDimensions.html

It's not clear which intake manifolds were used for these measurements, and that's a big factor when considering overall height. I've got an Email Performer 460 on mine and hood clearance is minimal. A Weiand Stealth or Edelbrock Performer RPM would require a taller hood scoop - most likely the Shell Valley taller version (3.5" IIRC).

Edit: Shell Valley has the scoops in two sizes:

• 14" L X 15.5" W X 3.25" H
• 31.5" L X 18.5" W X 3.5" H

I believe both sizes are also available in carbon fibre in addition to the fiberglass ones shown on the Web page: Cobra Replica Hood Scoop