 
Main Menu
|
|
Nevada Classics
|
|
Advertise at CC
|
| S |
M |
T |
W |
T |
F |
S |
| |
1 |
2 |
3 |
4 |
5 |
6 |
| 7 |
8 |
9 |
10 |
11 |
12 |
13 |
| 14 |
15 |
16 |
17 |
18 |
19 |
20 |
| 21 |
22 |
23 |
24 |
25 |
26 |
27 |
| 28 |
29 |
30 |
|
|
|
|
|
|
CC Advertisers
|
|
 5Likes
-
1
Post By joyridin'
-
2
Post By 1985 CCX
-
1
Post By Blas
-
1
Post By spdbrake
06-18-2021, 05:17 PM
|
|
CC Member
|
|
|
Join Date: Jan 2008
Cobra Make, Engine:
Posts: 351
|
|
Not Ranked
problem with steering wheel shake
when I am driving on the street or highway and hit a pot hole or large bump in the road, my steering wheel shakes very bad. Steering box? control arms?
|
06-19-2021, 02:14 AM
|
|
CC Member
|
|
|
Join Date: Oct 2007
Location: Cape Town,
WC
Cobra Make, Engine: Shamrock
Posts: 406
|
|
Not Ranked
Yes - either or all of those or even suspension bushes.
|
06-19-2021, 04:41 AM
|
|
CC Member
|
|
|
Join Date: Feb 2009
Posts: 1,690
|
|
Not Ranked
It could be a case of bump steer depending on how the car is set-up.
|
06-19-2021, 05:37 PM
|
|
CC Member
|
|
|
Join Date: Apr 2021
Location: Rainbow valley,
Az
Cobra Make, Engine: Lone star 351w /408cu.in.
Posts: 215
|
|
Not Ranked
Check your shocks for leakage, could be shot.
|
06-21-2021, 09:16 AM
|
|
Senior Club Cobra Member
|
|
|
Join Date: Mar 2005
Location: Manchester,
NH
Cobra Make, Engine: AK1085 (302), HTM111 (427 Comp), CSX2375R (289 Comp) and Scratch 427 S/C
Posts: 18,778
|
|
Not Ranked
If your shocks have dampening you may be set too low. My AC did this as it was on the softest setting causing bounce. Once I dialed it up, handles like a dream.
|
06-22-2021, 08:22 AM
|
|
CC Member
|
|
|
Join Date: Jun 2007
Cobra Make, Engine: dd cobra,351w mild cam
Posts: 119
|
|
Not Ranked
Not knowing what make or how your steering is set up I can only speak of my own experience...I have a Mustang II set up and it was terrible and scary to drive over any kind of rough road...I had it lined up twice with no difference in the shake that I would experience...What I did was put my car on my lift and with out lifting it I measured the height of the body to top of tire and the width from center of tire to center of tire...then I lifted the car and removed the shocks which would let me move the suspension through its normal travel more easily...what I found was about 1 inches difference in width through normal travel of the suspension...so I bought a Bump-Steer eliminator kit for my style of front end and installed it myself...after a lot of measuring and trial and error and another alignment it is a lot better...not prefect but now I just get more of a vibration when I hit a bump or pothole...steve
|
06-23-2021, 06:24 PM
|
|
CC Member
|
|
|
Join Date: Sep 2002
Cobra Make, Engine: SPF#0760
Posts: 3,389
|
|
Not Ranked
What tire pressure are you running?
Blas
__________________
Wiring Diagrams: SPF MKII, MKIII, GT40, CSX7000, CSX8000, Corvette Grand Sport, and Shelby Sebring, Bondurant & Cinema Tribute Cars.
Owner’s Manuals: SPF MKII, CSX7000, CSX8000, Sebring, Bondurant, & Cinema Tribute Cars.
Large, easy to read and trace schematics with part numbers, wire colors, wire gauge, fuses, and electrical upgrade information. Trouble-shooting and replacement part numbers for those roadside repair adventures.
SPFWiringDiagrams@Comcast.net
|
06-25-2021, 04:33 PM
|
|
CC Member
|
|
|
Join Date: Jan 2008
Cobra Make, Engine:
Posts: 351
|
|
Not Ranked
27 in the front, 25 in the back.
|
06-26-2021, 06:32 AM
|
|
CC Member
|
|
|
Join Date: Dec 2015
Posts: 1,442
|
|
Not Ranked
Steve,
Most likely its blown front shocks. The shaking after bumps is common with blown/leaking shocks on the BMW E36 suspension, which your car has. If you own a BDR?
Your profile does not reflect the model car you own or build #. Its helpful for folks responding to you with assistance to know what you own.
If you do a search in the Backdraft forum for "Shocks" you will find a few threads with part numbers, and instructions. Also it would be a great time to add Camber plates from IconicParts.com while you have the strut assys apart.
|
06-29-2021, 05:07 AM
|
 |
Senior Club Cobra Member
|
|
|
Join Date: May 2007
Location: Mesa,
AZ
Cobra Make, Engine: Contemporary Classic, 428 FE CCX 3069
Posts: 7,500
|
|
Not Ranked
Check your rear wheels for tire hop. Feels like front end issue but is cause by rear wheel hop.
__________________
Dan in Arizona
CCX3209
"It's a great car and I love it, but it doesn't do 'SLOW' very well."
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 11:32 PM.
Links monetized by VigLink
|
Linear Mode
