|
Garage flooring to cover failed epoxy
I bought a home that has a failed DIY epoxy floor coating in the three car garage. It is lifting and peeling all over. I can have it ground down for about .85 per foot and then recoated.
But, I was thinking about just covering it up with something like snap together tiles, roll out covering, or? Any ideas that don't cost a fortune are welcomed! Best quote on a grind off and recoat is around $2000 for base epoxy. More for fancier finish. I was hoping to spend about 1/2 that. |
Swisstrax, high quality product that holds up extremely well. Your budget may have to be flexible as a three car garage might be closer to 1500 all in.
www.swisstrax.com |
Swiss Trax is fantastic but pricey depending on style and finish. Epoxy May still be cheaper but I do love my Swiss trax
|
Posted before but anyway FWIW. Had race deck and -1 how do you wipe up oil spill? you take the tiles back up and clean. -2 how do you stop the tiles from moving when you turn wheels when vehicle is not moving? you don't.-3 How do you stop big movement due to expansion and contraction? You don't. How I solved was put down ceramic tile. Now can stop and turn wheel on bus motorhome without floor moving. Spills wipe up easy. Got 12" tiles in Mexico for 50 cents apiece. Used half thickness of thin set to put down so weight of bus will not crack, it's working been down 8 years. Bus weights 50,000 lbs. Put 4 post lift right on top of tiles and no problems. Cut tiles around two post lift , mill, lathe. Rest of equipment goes on top of tile. Welding over floor just put down welding blanket. 2800 sq foot garage was $3000.00
|
Epoxy for me, I don't like any hollow plastic tile.
If you spill liquid or loose a c clip etc on a solid sealed floor, you can fix the issue. Gary |
I wonder why the epoxy failed, poor installation, poor product, or maybe hydraulic pressure from underneath (no vapor barrier below the concrete)? I would try to get that figured out before deciding your path forward.
|
Quote:
|
I suggest looking into dry ice media blasting as a good way to remove the previous coating without damaging the substrate and with little mess except for the old epoxy. I have seen this process in action and it is pretty amazing how tidy it is. Once removed you can etch the flour per the coating manufacturers specs and apply your new epoxy.
Frank |
Quote:
$40 off per box of 48 square feet until March 29. Nice photos on the product page - polished Kirkham Cobra, GT40 and a street rod. https://www.costco.com/MotoFloor-Mod...100009181.html |
Quote:
|
Strongly disagree on the poor review of Race Deck. If properly installed (allow a small gap at walls for thermal expansion) they are unaffected by temperature changes, and the stuff about shifting wheen a car's wheels are turned also points to a poor installation. Pricey, but done right they can turn a garage into a man cave.
|
Tile works great for me. Just make sure it’s the correct hardness and has some non-slip attributes.
|
Had reps from race deck to my house to solve problems and they suggested putting screws through tile into concrete which we did in several places. I then pulled bus into garage and carefully applied brakes and whole floor moved. Had 1/2" gap around edge's like called for, spilled some oil and had to take up section. Knew the screws would not work but also knew I was going with ceramic tile anyway. If race deck type product works for someone that's good, just did not work for me. Put epoxy floor coating in garage at one of my rental houses and I don't think it's the same as it used to be. EPA has something to do with that. One more reason I went with tile. Easy to mop floor and with some pine-sol in water ,cleans oil drips and spills up great. Only problem is it's slippery when wet but air dry's real quick. Sold race deck to fellow member here for cheap to help him out. FWIW
|
Picture is worth a thousand words. Four post on top of tile. Been rainy here and I forgot how much easier tile floor is to clean up after bringing in wet cars
https://imgur.com/a/4r6YSqs |
I put down RaceDeck and it provides a nice floor but I did discover two issues. First, I couldn't get loaded car dollies to roll across it with out extreme effort. Second, water does easily penetrate the joints and sit on the concrete if you pull wet cars in your garage. I found that up when I was forced to pull up a section of my floor so I can roll my ERA I store against the side on caster dollies and found water pooled underneath from my Lightnings air conditioner drainage and once when I parked it outside and it rained and I pulled it back in without drying it off. Since I have my 66 Vette and 67 GTX in there also that moisture is not something I want in my garage.
|
I have had the race deck tile on my garage floor for about 15 years and only have two complaints. I couldn't get a flat tile back when I got mine and it has that diamond plate finish which makes it very hard to roll anything heavy over it. The water getting through can be an issue but I don't drive my cars when it is wet so that really hasn't bothered me. I have never had a problem with it moving or twisting while I am stunning the car wheels and I put the tile down myself. I have thought about taking it up and trying to get rid of that diamond plate type bump but I tried it on an extra piece and when I ground it off it looked crappy. I used a red and white pattern.
Ron |
What about the rolled mat that Costco sells? Has anyone had experience with that?
Cheers Greg |
I had Race Deck down for a while and really disliked it. It gets dirty easily, has an awful sound and it certainly is not cheap. I ultimately went with a vinyl glue down tile that works well. Easy to sweep with a shop broom and looks good. It has been down now for about 10 years and I would do the same thing again.
|
Quote:
|
Ron - I bought the coin pattern tile and I think I prefer it a little over the diamond plate. I don't usually pull cars in wet in this garage but the condensor in my Lightning does drain water on the floor when I've been running it. Since I had to pull a rectangular section out so I can get my ERA in and out, it's not a big problem as the Lightning parks on top of the opening in the tile.
http://i125.photobucket.com/albums/p...ps4j6ggpmy.jpg Kind of a bastardized flooring outcome but works for now. I don't have trouble with the tile moving - drop a 4-post lift on top of it and it won't go anywhere. http://i125.photobucket.com/albums/p...ps5phfskwt.jpg |
| All times are GMT -7. The time now is 06:51 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: