Clutch Master Slave Cylinder Question

[Jim Coleman]

Only two problems - the motor doesn't even have oil in it, and the wiring harness hasn't been installed.

However, there's something I did notice. On a mechanical clutch the pedal goes all the way to the floor to engage.

On a brake master cylinder, the pedal doesn't go all the way to the floor to engage.

My clutch master cylinder is going all the way to the floor. Is this normal ?

Thanks,


Jim

[Gaz64]

Originally Posted by Jim Coleman

Only two problems - the motor doesn't even have oil in it, and the wiring harness hasn't been installed.

However, there's something I did notice. On a mechanical clutch the pedal goes all the way to the floor to engage.

On a brake master cylinder, the pedal doesn't go all the way to the floor to engage.

My clutch master cylinder is going all the way to the floor. Is this normal ?

Thanks,


Jim

How long since the engine and trans installed?

Clutch pedal should go to the floor, regardless of type of operation.

Gary