
09-24-2020, 09:38 PM
|
|
CC Member
|
|
|
Join Date: Apr 2010
Location: melbourne,
vic
Cobra Make, Engine: Robnell Blown LS1
Posts: 296
|
|
Not Ranked
I also had a similar problem with hard shifting with my TKO600 and it was a bugger to get into 1st whist stationary.
Long story but we had fitted a HTOB which bolted to the input shaft housing on the trans.
The bolts were slightly too long and were pushing against the main shaft shims which was effectively over-shimming the main shaft.
Eventually worked this out and rectified... Now shifts beautifully.
Maybe worth checking the main shaft has been shimmed correctly.
Cheers
|