Body Swap Difficulty

[FredG]

If I were to attempt this project, which I wouldn't, the first thing I would try to obtain would be a dimensioned multi-view CAD drawing of the parts involved. Those would give you an idea of what you are in for. I hope you have experience/access with/to a torch, welder, plasma cutter, industrial bending brake, full size lift and a body dolly.

Here is a link to a site that shows the profiles of all the major brands. Check it out.

Compare car profiles

Fred

[patrickt]

You know, I bet a plasma cutter would work great on a fiberglass car.