Club Cobra Keith Craft Racing  

Go Back   Club Cobra > Cobra Talk Areas > ALL COBRA TALK

MMG Superformance
Nevada Classics
Keith Craft Racing
Main Menu
Module Jump:
Nevada Classics
Nevada Classics
MMG Superformance
MMG Superformance
Advertise at CC
Banner Ad Rates
MMG Superformance
Keith Craft Racing
MMG Superformance
March 2024
S M T W T F S
          1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31            

Kirkham Motorsports

Like Tree9Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 08-11-2022, 01:47 PM
Bill D's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2006
Location: Redding, CA
Cobra Make, Engine: FFR chassis and suspension, Mr. Bruce 289 FIA body
Posts: 1,066
Not Ranked     
Default Weber manifold and pcv

Has anyone hooked up a PCV valve to a Weber manifold after it’s installed on the car? I need it to pass smog,or am I ****ed?
Reply With Quote
  #2 (permalink)  
Old 08-11-2022, 03:20 PM
Blas's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Sep 2002
Cobra Make, Engine: SPF#0760
Posts: 3,387
Not Ranked     
Default

You have a valve cover breather? Temporarily replace it with a PVC valve then route a hose to something that looks like a port on the manifold. Or Superglue a brass fitting to tge manifold somewhere. Or maybe to a velocity stack.
Coil overs cans fix ride height and window tint Jels lens colors.
D-CEL, eschaider and Bill D like this.
__________________
Wiring Diagrams: SPF MKII, MKIII, GT40, CSX7000, CSX8000, Corvette Grand Sport, and Shelby Sebring, Bondurant & Cinema Tribute Cars.
Owner’s Manuals: SPF MKII, CSX7000, CSX8000, Sebring, Bondurant, & Cinema Tribute Cars.

Large, easy to read and trace schematics with part numbers, wire colors, wire gauge, fuses, and electrical upgrade information. Trouble-shooting and replacement part numbers for those roadside repair adventures.
SPFWiringDiagrams@Comcast.net
Reply With Quote
  #3 (permalink)  
Old 08-11-2022, 04:34 PM
twobjshelbys's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Jan 2009
Location: Las Vegas, NV
Cobra Make, Engine: Shelby CSX4005LA, Roush 427IR
Posts: 5,449
Not Ranked     
Default

I've always wondered if anyone with a real Weber or one of the faux 8-stack EFI systems has ever been challenged on this. My car from Roush came with the breather on the manifold and Colorado didn't question it nor mention a PCV. The only thing I could think of to do would be to route the tube into one of the trumpets. Roush did manage to fit a MAF in one of the trumpets so I can believe a PCV return would fit somewhere.
__________________
Cheers,
Tony
CSX4005LA
Reply With Quote
  #4 (permalink)  
Old 08-11-2022, 08:00 PM
CC Member
Visit my Photo Gallery

 
Join Date: Apr 2021
Cobra Make, Engine:
Posts: 533
Not Ranked     
Default

The manifold for my Webers has two ports on the floor of the manifold, sealed by pipe plugs. I ran an inline PCV valve over to the valve cover breathers.
Drastically cut down on oil blow by.
Reply With Quote
  #5 (permalink)  
Old 08-12-2022, 03:12 PM
Igofastr's Avatar
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Oct 2004
Location: Granite Bay, Ca
Cobra Make, Engine: SPF GT40P-2265/393W, KMP318 (PROJECT!!!!!)/CSX478
Posts: 1,158
Not Ranked     
Default

You can do it. I have.

In fact, I'd be happy to give you a reasonable price on the parts I used to get my IDAs to pass....if I can find them. It would include valve covers, one with PCV, hoses, and aluminum spacers for under the webers, one with a port and barb to attach your breather hose. It worked for me. Your milage may vary.

PM me.

Ron
__________________
Ron R

"Dishwasher? I thought that was for cleaning parts!?"
Reply With Quote
  #6 (permalink)  
Old 08-12-2022, 10:04 PM
CompClassics's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Feb 2013
Location: Carlsbad, Ca
Cobra Make, Engine: SAI FIA, 289HP (5-bolt), 48IDA Webers
Posts: 1,244
Not Ranked     
Default

I just recently went through the registration process with a 427 FE and 48IDA Webers. All you have to do is run a hose from the valve cover mounted PCV valve to fitting that is threaded into one of the carburetor air horns. We didn’t even use air filters. After the registration was complete we reinstalled the breather cap and a new carburetor air horn.
Reply With Quote
  #7 (permalink)  
Old 08-13-2022, 04:03 AM
1795's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Aug 2013
Location: Canandaigua, NY
Cobra Make, Engine: SPF MKII Riverside Racer FIA
Posts: 2,471
Not Ranked     
Default

It would seem to me that if it were to be a permanent installation, that the system would have to be set up to vent to all of the barrels. Given that each barrel is independent of a common plenum, if all of the venting was sent to one cylinder then that would alter the jetting on that one carb and would seem at face value to make it more difficult to balance, but I could be wrong.

Jim
__________________
Reply With Quote
  #8 (permalink)  
Old 08-13-2022, 04:25 AM
CC Member
Visit my Photo Gallery

 
Join Date: Feb 2018
Cobra Make, Engine:
Posts: 312
Not Ranked     
Default

Quote:
Originally Posted by KarlzEE Bebout View Post
The manifold for my Webers has two ports on the floor of the manifold, sealed by pipe plugs. I ran an inline PCV valve over to the valve cover breathers.
Drastically cut down on oil blow by.
Plumb one of these between the PCV and that manifold connection.
Compact air/oil separator will stop the lion's share of contaminants
from entering the combustion chambers. Very compact solution
to ensure only cleansed air gets re-introduced into the intake.

Bottom screws off to empty and it even has a dipstick.


https://www.addw1.com/collections/oi...-configuration

Last edited by Unique427; 08-13-2022 at 04:30 AM..
Reply With Quote
  #9 (permalink)  
Old 08-13-2022, 10:19 AM
EZ$ EZ$ is offline
CC Member
Visit my Photo Gallery

 
Join Date: Dec 2014
Location: San Ramon, CA
Cobra Make, Engine: Factory Five
Posts: 50
Not Ranked     
Default

The CA requirements have changed in the last year or so. I have a stack injection setup and they required that I come up with an air box that enclosed all the stacks together and all valve cover breathers had to be plumbed to it so that it was distributed to all the stacks. This was after I tried to plumb to one stack. It's a pain but once the inspection is done it can all be removed.
Bill D and CompClassics like this.
Reply With Quote
  #10 (permalink)  
Old 08-14-2022, 12:09 AM
CompClassics's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Feb 2013
Location: Carlsbad, Ca
Cobra Make, Engine: SAI FIA, 289HP (5-bolt), 48IDA Webers
Posts: 1,244
Not Ranked     
Default

If the only reason you are installing the PCV system is to get the car registered the system I described above works as needed, then you can remove it and return your system to the cleaner appearance without the PCV. As I stated I just went through the inspection process with the PCV installed as I outlined above and it was passed without issue. If you want a permanent system you will want to supply the PCV gasses to all the cylinders equally, but then why?

As EZ$ pointed out he had to take it a step further, in my opinion it all depends on the inspector as to what they want to see.
Bill D likes this.

Last edited by CompClassics; 08-14-2022 at 12:11 AM..
Reply With Quote
  #11 (permalink)  
Old 08-14-2022, 07:56 AM
Bill D's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2006
Location: Redding, CA
Cobra Make, Engine: FFR chassis and suspension, Mr. Bruce 289 FIA body
Posts: 1,066
Not Ranked     
Default

CompClassics I like your suggestion and will likely go that route. I will have to remove the air box I fabricated. A pita but I guess there’s no other option

1985 CCX and CompClassics like this.
Reply With Quote
  #12 (permalink)  
Old 08-14-2022, 02:08 PM
Bill D's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2006
Location: Redding, CA
Cobra Make, Engine: FFR chassis and suspension, Mr. Bruce 289 FIA body
Posts: 1,066
Not Ranked     
Default

Quote:
Originally Posted by EZ$ View Post
The CA requirements have changed in the last year or so. I have a stack injection setup and they required that I come up with an air box that enclosed all the stacks together and all valve cover breathers had to be plumbed to it so that it was distributed to all the stacks. This was after I tried to plumb to one stack. It's a pain but once the inspection is done it can all be removed.
I think this is the way to go with my setup.

Reply With Quote
  #13 (permalink)  
Old 08-17-2022, 04:04 PM
Bill D's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2006
Location: Redding, CA
Cobra Make, Engine: FFR chassis and suspension, Mr. Bruce 289 FIA body
Posts: 1,066
Not Ranked     
Default

Could I use an electric vacuum pump to simulate the vacuum generated by the manifold in a typical system. Attach one end to the PCV valve, then route the other end to the closed air box? Maybe add an oil separator in between the PCV and the pump?
Reply With Quote
  #14 (permalink)  
Old 08-17-2022, 04:36 PM
CC Member
Visit my Photo Gallery

 
Join Date: Aug 2007
Location: Carlsbad, Ca
Cobra Make, Engine: SPF 2932 with 438 Lykins Motorsports engine. Previous owner of FFR 5452.
Posts: 2,612
Not Ranked     
Default

When I got my sb100 sticker, I simply plumbed the proper hose from my valve cover breather into the bottom plate of my air cleaner. Drilled a hole in the plate and screwed in a barbed hose fitting. All they wanted to see was a closed venting of crankcase gasses back into the air cleaner.
__________________
Jim
Reply With Quote
  #15 (permalink)  
Old 08-17-2022, 04:49 PM
Blas's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Sep 2002
Cobra Make, Engine: SPF#0760
Posts: 3,387
Not Ranked     
Default

Quickly fab another closed air box with a cover filter out of galvanized duct work sheet metal. Plumb a connector for the Pcv line. Don’t bother to install the air horns. Cost $20 and some of your time. Didn’t you make an earlier version of the air box?
Blas
__________________
Wiring Diagrams: SPF MKII, MKIII, GT40, CSX7000, CSX8000, Corvette Grand Sport, and Shelby Sebring, Bondurant & Cinema Tribute Cars.
Owner’s Manuals: SPF MKII, CSX7000, CSX8000, Sebring, Bondurant, & Cinema Tribute Cars.

Large, easy to read and trace schematics with part numbers, wire colors, wire gauge, fuses, and electrical upgrade information. Trouble-shooting and replacement part numbers for those roadside repair adventures.
SPFWiringDiagrams@Comcast.net
Reply With Quote
  #16 (permalink)  
Old 08-17-2022, 05:02 PM
jknich's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Jan 2007
Location: SEQUIM, WA
Cobra Make, Engine:
Posts: 137
Not Ranked     
Default

Bill, couldn't you use these breathers with hoses to the air box?

https://www.ebay.com/itm/12411525458...3ABFBM6OL549Vg
__________________
Jim Nichols
Reply With Quote
  #17 (permalink)  
Old 08-17-2022, 06:22 PM
Bill D's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2006
Location: Redding, CA
Cobra Make, Engine: FFR chassis and suspension, Mr. Bruce 289 FIA body
Posts: 1,066
Not Ranked     
Default

I have one breather cap with a nipple and hose that will go to the air box. But the ref said I had to have the PCV valve installed and using vacuum to pull the gases out of the crankcase. The breather cap with the hose connected actually acts as a fresh air intake into the engine.

Using my design essentially accomplishes the same thing but uses an external pump to provide the vacuum normally achieved bynthe intake manifold.
Reply With Quote
  #18 (permalink)  
Old 08-22-2022, 09:14 PM
Bill D's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2006
Location: Redding, CA
Cobra Make, Engine: FFR chassis and suspension, Mr. Bruce 289 FIA body
Posts: 1,066
Not Ranked     
Default

One side completed




Bill D
Reply With Quote
  #19 (permalink)  
Old 08-22-2022, 10:38 PM
tkb289's Avatar
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Dec 2007
Cobra Make, Engine: ERA FIA 'Street' Build
Posts: 2,126
Not Ranked     
Default

When I went through the BAR inspection some years ago, they paid close attention to the labeling on the hose. It needed to be clearly labeled as Emissions or PCV hose.
__________________
289 FIA --- ERA 2136
Build Log:
http://www.clubcobra.com/forums/era-...build-log.html
Reply With Quote
  #20 (permalink)  
Old 09-18-2022, 03:12 AM
CC Member
Visit my Photo Gallery

 
Join Date: Sep 2022
Cobra Make, Engine:
Posts: 3
Not Ranked     
Default

If you want a permanent system you will want to supply the PCV gasses to all the cylinders equally, but then why?










Showbox jiofi.local.html tplinklogin

Last edited by mareclodaniel; 09-18-2022 at 04:42 AM..
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 08:04 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: CC Policy
Links monetized by VigLink