The manifold for my Webers has two ports on the floor of the manifold, sealed by pipe plugs. I ran an inline PCV valve over to the valve cover breathers.
Drastically cut down on oil blow by.
The manifold for my Webers has two ports on the floor of the manifold, sealed by pipe plugs. I ran an inline PCV valve over to the valve cover breathers.
Drastically cut down on oil blow by.
Plumb one of these between the PCV and that manifold connection.
Compact air/oil separator will stop the lion's share of contaminants
from entering the combustion chambers. Very compact solution
to ensure only cleansed air gets re-introduced into the intake.
Bottom screws off to empty and it even has a dipstick.
9Likes
Hybrid Mode
