10-13-2003, 07:57 PM
|
|
CC Member
|
|
|
Join Date: Mar 2003
Location: Duncanville, Tx,
Posts: 60
|
|
Not Ranked
Chuck,
About a month ago, I purchased the same set as you from ERA. I had mine go straight thru to the back of the car. Hope you have a good exhaust person to set these up..It took mine awhile..Also the angle on the primaries may have to be modified to set up correctly under the car. One thing I'm concerned about is there were no flanges that lined up on the headers and the primaries.
There is nothing to lock them together or prevent them from coming loose. I have exhaust leaks on mine already after driving it a very short distance and will end up taking it back to the shop to have this problem dealt with.
I think this could have been avoided with flanges on both sides when they were manufactured or have a lock down mechanism in place to prevent them from coming apart.
I would be interested in hearing of your experience with this exhaust set up.
Good luck,
Don
|
Threaded Mode
