Soft-top

PhilB · #1 (**permalink**) 12-05-2002, 10:41 AM

I'm thinking about building a soft-top. Anyone have plans/details of the metalwork and windshield attachment?

CRZN427 · #2 (**permalink**) 12-05-2002, 04:15 PM

Phil,

I make a folding soft top.

Before that I had a "Take-Apart" top that I mady myself.

It's not that hard. Do you have, or have access to, an acetylene torch. On the frame I made for the "Take-Apart" top I had to do some brazing. That is easier than welding, and for the purpose, works as well.

If you want, I will e-mail you some pictures, I don't have plans but I can give you a good description of what to do. A big plus is no modifications to the body are needed.

PhilB · #3 (**permalink**) 12-09-2002, 05:55 AM

CRZN -

I would very much like to see the photos. Welding/brazing is not a problem - metal fabrication is one of my specialties. My e-mail address is pbaldwin@psemc.com. I apprciate your help.

jams · #4 (**permalink**) 07-29-2003, 12:58 PM

Can anyone forward me some info & pics about the soft top they built. I would like to give it a shot.

Thanks Jim
jdolan2726@aol.com