racing windshields
HEY GUYS....WHERE CAN I GET A RACING WINDSHIELD SUCH AS USED ON THE 65 COMPETITION CARS. I THINK ALSO LIKE CAL'S CAR AND ALSO I THINK BRENT HAS ONE ON HIS NOW. CRANKY TOO?
JAY |
Jay,
I got mine from Cobra Restorers in GA. It is very brittle and will crack if you look at it the wrong way. If you can find one made out of Lexan that would be better. Crank |
Jay,
I have one that I purchased from Cobra Restorer's. I ended up making one that better suited me. It has never been mounted. If interested send me email. Danny |
I have the one from Cobra Restorers, and yes, it is very brittle. I ended up making a unique aluminum base for it (Jay, mail me this weekend, and I'll try to get pictures this coming weekend if you're interested) so that I could mount it and remove it easily and not put holes in front of where the windshield would normally be so I can make the switch in under a half hour. Worked out pretty well actually, and I love the look.
|
Crack in Cobra Restorers
Yes they crack but it is all in the installation. I had mine on and off more than a few times in the fitting and it never cracked.
Even after 2000 track miles.. I can guide any of you through it.. |
Here's one pic I have now which shows some of the work I did...
http://www.clubcobra.com/photopost/d...4dash1-med.jpg The front few nuts/bolts are shorty's and just mount the plastic shield to the stiff alumunim piece. All other attachments are actually behind the line where the full shield goes, so I didn't actually mess up the paint by putting holes where they would be visible when the full shield is on. |
GENTLEMEN
THANK YOU VERY MUCH.
JAY |
Here's me on the highway last year with the racing screen on.
http://www.clubcobra.com/photopost/d...rent_cobra.jpg |
How tall is that? Thickness?
I'll make some out of lexan, if you guys want. Any particular features? How thick would you want them? I need to make a couple for around here anyway. Any I make right now will be one off, so this is your chance for custom windshields. If anybody wants a lexan version of a cracked plastic one, send me the broken one. Or send me some specs. I've been itching to do this for a while, and now I have an excuse. Steve Kirkham 2575 West 1680 North Provo, UT 84601 |
windscreen
Steve - I have what I believe is an original windscreen that is cracked right through the middle, can you duplicate it exactly, including same material, thickness, etc? Do I get the first one free for letting this be used as a pattern?
|
Steve, I would be interested in purshasing one if you end up making them. I dont have a pattern so I would be happy with one that you can get off someone else. Email me if you want.
Andy. |
Re: windscreen
Quote:
Steve Kirkham 2575 West 1680 North Provo, UT 84601 I'm not comfortable with the idea of copying Cobra Restorer's windshield, by the way. I'll just make copies of originals, or somebody's fresh new design. OK, anybody who wants a lexan windscreen, please email me: steve@kirkhammotorsports.com and I'll keep you posted on progress and pricing. On a slight tangent, anybody notice the current Kirkham 427 on eBay actually has a windshield already installed? DOT & Europe approved and everything. --Steve |
Hey.....
......................why is George Costanza driving Brent's car?
Inquiring minds want to know! Rick:confused: |
If it helps at all, guys, the thickness of the shield on CSX 2189 is 1/8 inch.
|
thickness
Cal - The 289 windscreens were different than most 427's, but having a thickness to verify is certainly valuable. The 289 usually had the reinforcement around the bottom, whereas the "traditional" 427 screen was solid clear (note, there were a couple or few very early comp 427 cars that left SA or were outfitted with the 289 style reinforced screen). I just checked my original 427 screen and it's .133"-.139" thick, depending on where you measure it.
|
You are correct. Mind does have the reinforcement around the bottom--actually painted to reflect the color and stripe.
|
Well, I've been studying up on care, feeding and birthing of lexan.
Anybody have a clue why the aluminum strip vanished when the windscreen went to the big blocks? Just figured they didn't need them after all, perhaps? Prveqty, I accept your offer -- forget the discount. You'll get a free clone in return for providing the original DNA sample. Thanks. |
Oh man, thanks Rick! :D
I was kinda dissapointed because I could have sworn the cobra restorers catalog showed the reinforcement. I would prefer something along those lines. |
Guys,
Thanks for the measurements; I really appreciate the info. I've got an original 427 screen here that's 1/8 inch. It's cracked in two as well. No reinforcement strip, just clear plastic. |
windscreen
Steve - I'll send mine out Monday and include some 60's photos. I assume eliminating the reinforcement strip saved cost after they figured out how to mold it with the bottom lip.
|
All times are GMT -7. The time now is 01:55 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: