Just returned from Dynamic and PE

[traindriver]

I just retuned from my trip to Dynamic Motorsports and Performance Engineering.

First, I went to PE to take a look at my 351W motor for SP1591. I was immensely satisfied with the results. Eric had her on the dyno and made a power run for me. She peaked at 450.0 hp @ 5800 rpm and 432 ft-lb @ 4900 rpm. The average torque from 3000 to 6000 rpm was 409 ft-lb. She idles with a very slight lump, in fact it's hard to even call it a lump. I've never actually witnessed a gross hp dyno run before, wow! At 6000 rpm it sounds like a frieght train! Here's a pic.

Later I went over to Dynamic to take another look at SP1591. Mark had the wheels on and was planning on starting the prep work. Mark and I spent about 3 hours going over a lots of details on the install. With Mark's and Eirc's help I'm very confident my install will turn out perfectly. Delivery is scheduled for around 3/19.

I can't tell you enough how cordial and friendly everyone at Dynamic and PE are. They treat their customers like family. If you are considering an SPF, get in touch with these guys, you will not be disappointed.

Chuck Kendall