Lunch at the Sandwich Factory April 5, Ventura, CA.

[IntimidatorI]

Sorry to change topic but this is important. I have a little labor issue problem and I would like to know if anyone is an attorney? Or could anyone recommend an attorney that could give me a consultation?

Now, COBRA related. I pulled the bottom end down tonight and found that number one rod bearing had starved. I detected a small knock and shut it down at Cal Speedway. I can just re-bearing it as the crank is perfect but I am having an oil pan made and will not get it until next week. So I will be there for lunch in my Jeep.

FYI, this may sound corny but I found a Mexican guy on the internet that makes racing oil pans and he is in LA. So today I went to look at his handy work and was very impressed - in fact I contracted him to build me a pan. He specializes in Cobra racing replica pans at very reasonable prices. I am having a copy of the Shelby 427 road racing pan made - I can't wait to get it. I will now have to start showing people the UNDER side of the car as well. Here is his info in case you are interested, maybe it would be a good idea to put this contact in your reference book for later - you never know!

Armundo's Racing Oil Pans
6225 Wilmington Ave.
L A 90001
323.588.7622
aroilpans@aol.com
http://www.geocities.com/MotorCity/Flats/1624/

Thanks everyone for your patience,
eric