Brake calipers

wesjr · #1 (**permalink**) 07-25-2003, 02:41 PM

I am building a B&B, the 2 calipers they sent seem to be the same, my question is should there be a left and right or does it use the same caliper on both sides, my problem is that the cable on the passager side does not reach, due to it having to route to the lower side of the caliper

Slow Dawg · #2 (**permalink**) 07-26-2003, 07:06 AM

They should be opposite. Not same. I wonder why they were not already mounted on the axle? Bryan will be back on monday from vacation. I'll tell him when I get there. If you would, call Karen after 9 am monday at 417-472-3547 and we'll get the right one shipped out to you.

Ron

wesjr · #3 (**permalink**) 07-26-2003, 08:44 AM

Yes, I have had them on for a long time but I did not have the line on yet, so when I tried to install it I noticed it was not on correctly.

Slow Dawg · #4 (**permalink**) 07-26-2003, 02:01 PM

Since you've had it for a long time, I should have asked, is it a 9" or 8.8"/drum or disc? Did you get it from us or one of our dealers?

Ron

wesjr · #5 (**permalink**) 07-26-2003, 07:23 PM

Its a donor kit, and I have had it for maybe 3 months now, the Mustang II front end was from B&B