Does anyone have the part # for these?

blykins · #1 (**permalink**) 07-27-2003, 02:06 PM

I'm looking for these valve covers that will clear tall roller rocker arms...I thought Ford Racing made them, but I can't find a part number. Does anyone know it?

Thanks,

Brent

blykins · #2 (**permalink**) 07-27-2003, 05:07 PM

I would settle for the valve covers with the black wrinkle finish also...just as long as they are tall enough to clear my roller rockers.

TonyMadrid · #3 (**permalink**) 07-27-2003, 06:01 PM

Hi Brent,

I have the same dilemma, I need tall covers. Guys in here have recommended Branda. I believe the site is cobranda.com

Tony

Rob_R · #4 (**permalink**) 07-27-2003, 07:06 PM

I used the Tony Branda valve covers on a Ford 392 Stroker crate motor with roller rockers. The Branda valve covers had lots of room.........but I checked the clearance first before firing up the motor.

Robert

blykins · #5 (**permalink**) 07-28-2003, 02:39 AM

Well as far as that goes, I have a set that fits...The Ford Racing Polished Aluminum valve covers will fit with room to spare...but I was wanting the ones above. I've seen roller motors with them on it (albeit black wrinkle finish) but I just couldn't find the part number for them. They're out there somewhere, I just need to find them.

Rob_R · #6 (**permalink**) 07-28-2003, 04:26 AM

As stated above, the valve covers you show a picture of are available from Cobranda which is Tony Branda. Their website seems to down this morning.

The part number for a 289, 302, 351W is : VC241

The part number for a polished set for the 289, 302, 351 W is: VC241P

These are the natural finish, not the black finish.

Website - http://www.cobranda.com

Telephone number - 814 942-1869.

Robert