Tilton pedals

thardin · #1 (**permalink**) 09-08-2003, 09:37 PM

Anyone run these in their car? I am interested in the floor mout assembly. If I were to autocross, would there be an issue with the reservoirs being inside the passenger compartment? How about with CT DMV for registration? Here is a link..

http://www.tiltonracing.com/brake/pedals.html

Cracker · #2 (**permalink**) 09-09-2003, 07:06 AM

I have that system in my car but required quite alot of work to fit them. The upside is that (if you care) the cage I made to bolt the assembly to is just like an original with the little stubby master cylinders fitting under the side exhaust. I've had no problem with brake fade whatsoever and the pedals work great! The only thing I didn't consider when building the cage is allowing room for the Brake Bias adjuster so don't make that mistake.

I have attached photos to the links below and if you want more detail feel free to call me at #800-895-7531 x101 for how I went about doing it. Best wishes!

http://www.clubcobra.com/photopost/s...php?photo=9231

http://www.clubcobra.com/photopost/s...t=1&thecat=500

PNJSNAK · #3 (**permalink**) 09-09-2003, 05:28 PM

Thardin: Ckeck with Roscoe, he has the floor mounted ones in his A & C. The reservoirs are in the engine compartment on the firewall. Looks like he just went with longer hose material. I'm sure he will chime in on this thread and provide pics of his set-up. The guy is very helpful to all us "cobrafiles". Kuddos Bob!!
Jim

Roscoe · #4 (**permalink**) 09-09-2003, 09:21 PM

These work great!

Roscoe

rdorman · #5 (**permalink**) 09-10-2003, 03:08 PM

Floor mounted is better! Wish mine where. True Choice has a package that includes the peddles, balance bar and remote adjuster and three master cylinders for $435.00
Rick

thardin · #6 (**permalink**) 09-10-2003, 03:48 PM

Roscoe,

Are those floor mounted or hung on the firewall. Which model did you get. I really want to go with the floor mount. ANy issues you had to deal with that might help me out?

Thanks,

Tom

Double Venom · #7 (**permalink**) 09-10-2003, 03:54 PM

We use both the floor and the firewall-(upper) set. If you want a pro set-up, these are the ones to go with!

DV...it's a hobby, not a job!

Roscoe · #8 (**permalink**) 09-10-2003, 07:30 PM

Those are the floor mount. The bolt to the chassis and thruough the floor to a plate.

I luv em.

Roscoe