12-02-2003, 12:35 PM
|
|
Senior Club Cobra Member
|
|
|
Join Date: Oct 1999
Location: Menomonie, Wisconsin,
Posts: 3,505
|
|
Not Ranked
Assuming a 26 inch rear tire, the driven gear tooth count should be 19 or 20; whereas the drive gear (sits on the mainshaft inside the tail) should be 7. This would work out to 3.73 which is just about on the $$ for your application.
Last edited by Cal Metal; 12-02-2003 at 12:47 PM..
|
Hybrid Mode
