Brake Fittings

[Jeff Cruise]

Can't find any 3/16" 90 brake fittings. Anyone know where to get these?

[Mike Hausner]

Hi Jeff
I had a similar problem with my front brakes. I had to swich to stainless steel braided lines at the caliper. You can get streight, 45, or 90 degree fittings. I paid about $80 for the two flex lines. Try SPEEDWAY MOTORS, they sell all kinds of street rod & racing parts.
Good luck, MH

[Rick Parker]

Are you using AN fittings? 3/16 is a -3 size, any Earl's or similar vendor should have them available. If you are using hard lines a 90 degree fitting is available from most parts houses with an inverted flare in it with the fitting made of brass.

Rick

[Jeff Cruise]

I am doing hard lines with brass fittings. I have called a lot of places around Indianapolis who say there isn't any demand for them and don't have them or make them anymore.

[rdorman]

Look up aeroquip or earls, they should have them. Some place like Aircraft spruce would probably be a good choice as well.
Rick