Injection air horn filters

[thorconstr]

Doe's anyone know of a company that makes screen/filters for injection air horns? The type that is held on with a rubber ring. I'm looking for something to fit on TWM injection. The air horn inlet is quite big at 4.19 inches in diameter, whereas Hilborn is around 3.5 inches. Any ideas would be greatly appreciated.

[Ken Oikawa]

Hi Al

If you find anything please post the info. I'm also looking for screens held on by rubber ring for my TWM velocity stacks.

Ken

[ASPMAN]

try Wayne Presley
www.verycoolparts.com

[Cracker]

Al & Ken,

I also have very wide stacks at the bell and there seems to be nothing on the market to fit these items off the shelf. I'm currently developing an alternative filtration system that would universally fit all stack designs without limiting performace - I'll keep you posted. BTW, it seems that most folks don't even like the screen filters and they run the open (completely) since the school of thought was the majority of air entered around the side of the bell and placing anything like a rubber ring with flange on the screen disturbed it's entry.

Al - who's velocity stacks are you using and where did you get them? How tall are they and do they fit IDA's?

Have a great day!

[Ken Oikawa]

Hi Tony

Thanks. Keep us posted.

Ken

[ASPMAN]

http://www.verycoolparts.com/Stack.htm

bottom of page.

[thorconstr]

Aspman, Thanks

Tony, The stacks & injection are TWM. You can see them on my gallery or go to www.twminduction.com click on V8 kits and scroll down to the 427 setup. There is more info there.