Computer program for suspension geometry

[Ant]

Does anyone out there have any tips on any good suspension software, mainly for calculating roll centers and rack position etc?

Reason is I am going to either shorten my front suspension arms, or move inwards to allow clearance for slicks etc. I am contemplating shortening my steering rack, but would like to find a Computer program so I can input different data or positions of components and see how they work out.
Another way would be to make a half or full size cardboard representation of the uprights/ arms and locating points and pivot/roll the chassis to see where things end up!

[Edbo]

Like this??

http://www.bevenyoung.com.au/suswin.htm

Ed

[bigmike]

That's $ 218.93 is US dollars. Worth it for more than just a one-time shot; little pricey for just one.

[Junket]

Ant I use to have one of Steve Smith it was on 3 1/3 disk belive they still have on cd's work good will look and mabe I can find it and send if you like, will try to send the link alsohttp://www.ssapubl.com/
Ken

[Ozgur_Tan]

you could download 30 days trial for SusProg3D from www.susprog.com
Ozgur