Hello Everyone, Kit Cars to go here. First thing I'd like to say is ,"I'm glad to be here and represent myself (or defend) on behalf of my dream> KIT CARS.
I'll try my best to explain why I'm in the buisness and adress any concerns I read above......
First I'm here because alot of Americans dream of owning one of the Cobras and that's all they can do, DREAM",. I offer a Complete rolling Chassis constructed of 2 by 4 rectangular steele 11 gaige cold rolled, cross braces are 2 by 2 same as above, floorpan supports are 2 by 2 same, body support roll is 1 by 1, and the cowl is 2 by 2 same. There is more than sufficient room for suspension upgrades", and purchasing a pre-established kit due to the companys name is not a better idea.
Our bodys are 14 mil thick Gel coat and RMP (Radius Marine Putty) reinforces every angle of the Kit, NO THICK BODY HERE average 3/16 inch thickness and up to 1/4 to 1/2 inch thickness on areas surrounding headlights, tail lights, hood pin mounting points. Our hinges are welded and scabbed 100 % into the body frame (Roll) made of one by one, we are however considering handlaying them into the body? Any sudjestions would be appreciated.
We've been in busiiness for 1 year! Started not even being able to pay the bills", now people that have taken the time to visit our shop, say we're good. As the matter of fact they say we're one of the best bodies they've ever seen! When our body has set in the mold for 48 hrs it's removed and we trim it completely", then we remove any clay and Gel Coat lines from the body, all pin holes if any are filled and all air pockets if any are busted and repaired by us (NOT A SUPRISE TO THE CUSTOMER). Then we add High Gloss additive and oxidizer as welll as acitone to the mixture and complletely re-shoot the body giiving the customer a Beautiful foundation to start from.
We thought with our contacts we could supply the Donor mustang prts for the customer again and assemble them.
When the customer purchases the $8,500.00 roller, they just saved $1,000's and many man hours of working that require equipment most people don't have laying around in their garage". The rims and tires arre also included.
geoz3, AKA George, I delivered the Kit from SC all the way to South Miami and spent atleast 2 hours with him inspecting the Kit (He loved it) hands down, and then one small defect wich we offered to make good on until he started using Profanity and threatening us with a Law Suit, at that point I acknowledged the issue and realized it was a mistake that my shop could fix in about 4 hrs and still continued to try and work with Mr. Covelli and every time I tried to be nice, he would start disrespecting again, not a man worth dealing with reasonably, and I washed my hands with him.. I will not leave a customer hanging with no where to obtain parts, everything needed minus (ebrake/pedals/motor/transmission) is in my catalog. I must add I don't make a dime off of anything in the catalog, 90% of the Cobra parts are supposed to have a 25% mark up for us to make profit, but I just put it there and let the customers make the savings. On an average, the roller bought from me for $8,500.00 the catalog can complete it NICELY for around $5,500.00
"NO BS", my business location is 30 YARDS off of HIGHWAY 146 that connects HIGHWAY 146 to HWY 417, RUNS INTO HWY 385, HWY 85, HWY 221, HWY 1-26, NOT LOCATED IN A SUBDEVISION, 5,750 SQF Facillity about to expand....
I promise the Cobra world and Kit Car lovers that we will provide their Dream Cars and at a price they can afford, we will substitute the Quality or Craftsmanship of my product for the reduction of price, if anything we do MORE"""""""""""""""""""""""""""""""""""""'''.... PERIOD....
Brian. Representing, Kitcarstogo.com
Excuse some of the mis-spellings my Lap Top buttons stick so bad I probably typed three pages this size justt to get this one right, PEACE
geoz3 is not being honest""""""
Hybrid Mode
