Scuffing Aluminum Panels

[strictlypersonl]

Originally Posted by ERA2188

Bob, what is the objective of scuffing the aluminum panels? Cosmetic only? or is there some benefit in maintaining panels clean etc.? Rick d (whose panels have just been installed!)

I had to take the press-brake forming lines off the 289 grill parts. While I would have liked to just make them smooth, it was very impractical, time-and-effort-wise. Instead, I gave them a fine brushed finish.

[John McMahon]

For a nice satin finish.....

1 - Scotch Brite pad and NAPA Twin Etch #6879. (stains and dulls the surface).

2 - Use rubber gloves when using the acid and move the pad in a uniform direction.

3 - Wipe down with rag and cleaning solution.

4 - Use clean rag moistened with WD 40 to add a sheen to the panel.

5 - done.

Examples of work: