CSX3002--for those who have pics, what is the decal on the fender
 

Sorry I meant CSX3002. I don't know how to change the headline now that I typed it.
I was just looking at Friedman's softbound book RACING COBRAS published by Petersen some years ago (and in hardbound by a Newport Beach firm some years before) and noticed he has a front 3/4 view of the brushed aluminum finished (unpainted ) Cobra that was captioned "the first and only factory sponsored big block Cobra" The picture is printed on lousy porous paper so I can't see what the decal is on the side. It looks sort of like a Thunderbird decal, with two wings going straight out. The decal compared to the side vent looks about 6" long and 2" high. I can't see what's in the center. Could this be a H & M insignia? If makes me wonder if the engine was installed by H & M as they had lots of racing 427 engines at the time from NASCAR. I also find it odd that, since I recall a picture of this car from the rear 3/4 that it had a glove compartment when I thought racing 427 Cobras had no glove compartment, but maybe they sorted that out once they began racing it, being surprised the first time the door flopped open at speed.

I am also confused where the two pictures were shot. I think one in England (the test track shot from the rear 3/4 with Remington visible) while the other shot I've seen shows cars with black and yellow Calif. plates.

3002 did use a 289 drop dash with glove box. All the pics I have of the car shows Goodyear decal, Autolite, Sperex VHT, and Koni. Typically the Koni is a triangle however they did produce a set of wings. Perhaps you are referencing Koni?

...fixed the title for you.

Anything like this?


http://i250.photobucket.com/albums/g...42/DECL171.gif

Unlikely that it was Holman and Moody. As you say they were more involved in other areas of racing and really did not get along with Shelby. I know you are surprized by that statement.

I don't have a photo showing the sticker but here's one of the interior:
Larry
http://i21.photobucket.com/albums/b2...02Interior.jpg

3002 was the first "big block" car, but it was a modified 2000 series car, and not the first car built specifically as a big block car. So yes, it had a glove box.

I don't think Wallace is referring to any final stickers on 3002, as raced.

I think he means the gizmo on the side of the car in this delivery picture

http://www.clubcobra.com/photopost/d...0early3002.jpg

I always saw it as 'something' held on by masking tape. :D

Can't remember which ex Shelby employee I overheard speaking at an early SAAC convention in California, but I believe it was something like this (which was actually taped to the trunk lid of the car when officially delivered as a joke to the original owner);)

http://images.jupiterimages.com/comm...7/22256776.jpg

Here is what I have....looks like a 427 emblem to me....

How about a "night light" for a meatball number.????????

I am not sure what that is on the side, but it is not a 427 emblem. I tried to blow it up and it is nothing like the 427 emblems on the 64 Galaxie. About the only thing I could get clear was that whatever is in the center looks like the number 1. Whatever goes out to each side doesn't look like the wings on my 427 emblems. But my photo program is a cheap one and when I blow it up enough to read the 1, I lose all the rest. Maybe someone with a good photo program could blow it up and keep enough contrast to tell what it is.

Ron :confused:

Sal you are thinking of the Flip Top car. CSX3002 is the first 4 inch frame rail, coil over shock, Cobra.

It looks a bit like this 40th anniversary GT500 KR emblem. Could it have been an early prototype Cobra emblem?

http://z.about.com/d/mustangs/1/0/Z/...GT500KR_12.jpg

I think CSX 2196 was really the first "Big Block" car

I blew the picture up and near as I could tell it looks a lot like the photo MadMiles posted of the Koni winged logo. Couldn't get a really clear view because of the degrading of the original photo.

Here is a thought...Was 3002 Ken Miles car? Do I remember reading somewhere that he has a decal that he had ao all his cars somewhere? Also...Wasn't the Koni decal triangular in shape? I'll hit the ooks tonight to see what I can find......

It looks a little like the old Firestone emblem.
Larry

Maybe its just some sort of a shipping sticker or label.:)

Holy brain farts Batman! What was I thinking?? :LOL: