Spinner Safety Wiring - Straight In

[JBo]

There exists a reversible safety wire plier set, that is equipped with a TPI (turns per inch ) counter. It has as well a tightness indicator fabricated from unobtanium that is accurate to 10 urgs per mm in tighteness. it also has a feature that allows for the proper sized "tell" to be in the properly twisted wire , depending on the side of car, tightening rotation applicable to that applicatiom in constant urgs or cu's. It is stainless steel with near unobtainium jaws ( works with all wire sizes uo to 1 nu (nano urg or mu maxi urg sized wire). It may also be used to twist hemroids before covering with a band-aid.
My god, just safety wire the damn knock-ons...it may save your car and your life as I can personally attest.

[HI Cobra]

Heh heh. Just go back to Warren's reference - good info.

http://performanceunlimited.com/cobr...tructions.html

[Power Surge]

I would like to think Jamo is pulling everyone's leg with the different twist directions as used on Cobra spinners.

But regardless, most of the autotwist safety wire tools have both directions.