On the 2nd oil cooler, heading to 3rd

[StreetSnake]

70 degrees Cel. I wanted to see it between 90 - 110. Thats what I understand as a good range. I got a big chunk of cash in the motor (from my standards) and I want to make sure I take good care of it.

[mpanten]

Originally Posted by StreetSnake

70 degrees Cel. I wanted to see it between 90 - 110. Thats what I understand as a good range. I got a big chunk of cash in the motor (from my standards) and I want to make sure I take good care of it.

There has been a lot of opinions on here as to how warm the oil needs to get to burn off the condensation. From my research I am pretty comfortable with the 65 degree cel number, that brings it to 155 F. Anything over 75 cel is fine, Mine gets to 80 cel max, it does not need to be over 100, nor does your oil psi need to be over 60 lb's, You might want to try taping off the back of the oil cooler, Other people have gone the low tech route by sealing off the lines to the oil cooler with cardboard and have have great success.