CSX rear roll bar grommet? - Page 2

TButtrick · #1 (**permalink**) 07-22-2009, 07:41 PM

like I had stated.. pathetic.

patrickt · #2 (**permalink**) 07-22-2009, 07:52 PM

Quote:

Originally Posted by TButtrick

like I had stated.. pathetic.

Don't worry, Evan will use one of his peremptory strikes to take you away from me.

Nedsel · #3 (**permalink**) 07-23-2009, 11:13 AM

Jim, maybe a "self-parking" ability might be good for you as well. And I would suggest the place to do it would be the wing off the hospital where they wear the white coats with straps and buttons up the back. You know where it is, right?

Jim Maxwell · #4 (**permalink**) 07-23-2009, 07:32 PM

Ned, I'll have you know that they use Velco these days. Buttons are so passe'. And, yes, I am quite familiar with "my home away from home", thank you very much.

misfit41 · #5 (**permalink**) 07-26-2009, 08:33 PM

I have had the same concern when I rarely wash my car ,a vacumn hose layed in a piece of angle iron and slit with a razor blade will fill the gap ,but it isnt like fiberglass can rot.
I never made the fix nor do I run my spindle caps,I want it to look like what it was supposed to be; A Race car.Tk