new flow figures

[two89w]

here are my new flow figures for my windsor snr'sinlet) 67.2cfm @ 0.100lift,139.4cfm @ 0.200lift,197.9cfm @ 0.300lift,243.4cfm @ 0.400lift,275.1cfm @ 0.500lift,297.1cfm @ 0.600lift,309.2cfm @ 0.700lift(exh)57.8cfm @ 0.100lift,117.2cfm @ 0.200lift,151.9cfm @ 0.300lift,185.6cfm 2 0.400lift,193.7cfm @ 0.500lift,203.2cfm @ 0.600lft,209.2cfm @ 0.700lift,now for the down side of my figures,these are my flow figures for my head/manifold/carb(44mm weber)as an assmebly: 84.1cfm @ 0.100lift,154.4cfm @ 0.200lift,196.0cfm @ 0.300lift,215.9cfm @ 0.400lift,229.2cfm @ 0.500lift,239.7cfm @ 0.600lift,246.5cfm @ 0.700lift,im loosing 15%flow (because of my 44mm idf webers)at 560lift which is the peak lift of my current cam! thought i might share this info with you all cause im fairly excited about my new figures