Panhard Bar & Wheels

[Speedwaypj]

After reading a comment by jbcobra67 about his brakes; I checked out his build and sent him the following questions. His response is below - Just wanted to share the info:
- PJ
============= Questions ==========================
Joey,
I'll be ordering my A&C kit shortly; and I have a few questions.
1. Did they provide the Panhard Bar mounts/fixtures/etc ?
2. If not please let me know where you got it from.
3. What rims (Size/Brand/offset) did you buy?
4. What tires (Size/Brand) did you buy?
5. What brakes (Fnt/Back) ?
6. PS ? PB ?

BTW - nice Job - how long before you finish?

Thanks,
PJ
=============== Response ========================
Congrats PJ, this has been a blast and I'm not even finished yet.

If you get the panhard from A&C it comes with everything you need to install.

I got my rims from cruizinconcepts.com, great prices.
Front is 17 x 9 with a 6" backspace.
Rear is 17 x 10 1/2 with a 6 7/8" backspace.
I had to use a 3" adapter/spacer on the rear and a 3/4" spacer on the front.

Tires are from tirerack.com. Sumitomo HTRZ. Great price and delivery.
Front 245/45/17
Rear 315/35/17

The brakes are from the A&C, disks all around.

I went with PS and PB. This is where I had to get creative. If you want info let me know. It's very tight under there. Depends on your motor also.

Post pics to share in your fun.

Anytime you need help send a note. Also post on the A&C build forum, the guys there are helpful.

I need to post more myself. It's been so cold I haven't been able to do alot. I think I should finish by spring or sooner if I get busy.

Joey

[eddytheb]

You know you can run a 335 35 17 on the back and with 17s you guys should really consider bigger brakes than what A&C offers there only a few dollars more.

We finish unfinshed Cobras Stop by and see what we are working on @ www.eddytheb.com