Rear bumper

bjretired · #1 (**permalink**) 08-10-2015, 07:36 AM

I'm in the process of putting quick jack bumpers on my A&C CHP says I need them......The guy I bought the car had no intension of using them and cut the rear braces off the frame before mounting the body. Looking through the holes I believe I can just drop the fuel tank and weld a piece of angle iron with a gusset on each side. What I need is the size and the distance up to the first hole so I can get them in the right place. I read somewhere that they are 31' between them. I kind of like the looks without them....Thanks Bob

saltshaker · #2 (**permalink**) 08-10-2015, 06:15 PM

I can send that to you tomorrow...do you need pictures?
Jon

bjretired · #3 (**permalink**) 08-19-2015, 07:20 AM

Thanks for the Pics. They were a big help. kind of debating weather to drop the gas tank before doing the welding or not. I almost think that I could get away without dropping it.....bob

bjretired · #4 (**permalink**) 09-12-2015, 07:57 AM

Here is the Pics of the new bumpers. Took me a while to get my nerve up to start drilling.......Car is actually Dark Blue with a Lighter Silver blue stripe the length of the car. Thanks for the help bob

Wheels are 12 x17 with 335x 17 r
9 x 17 245x 17 f