Engine Paint for 427 ford

[blykins]

Bobcat, that's a very thorough procedure you have....

All of my stuff is usually centered around a fresh build, so after I get the block back from the machine shop, it's pressure washed really good and then blown off with compressed air.

Here's a Duplicolor paint job on a 383SBC for an '81 Corvette that I just did.

[Monster]

I used Dupli-Color 500deg. It's been on for about 2 years and still looks like the day I painted it[IMG][/IMG]

note: 500deg is about the highest temp you can get in gloss black (original 427 color) that i know of.......... heck, if it gets hotter than 500deg. you'll have more trouble than paint blisters

Mike