|
Surely just a couple of good coats of haymes gloss acrylic in baby blue will suffice Dave?
|
Trying to do the engine bay right,so I wont have to pull the motor out again.
Had some bits arrive today. http://i270.photobucket.com/albums/j.../photo-519.jpg So when I got home I started fitting it all up, and got carried away and just kept fitting bits (should have been sanding engine bay) http://i270.photobucket.com/albums/j.../photo-609.jpg http://i270.photobucket.com/albums/j...photo-2342.jpg Had to shorten a few leads to make them right, but figured I would spend the time doing it now. And so the Cobra does not feel left out, these ariived today too. http://i270.photobucket.com/albums/j.../photo-730.jpg Cheers Phil. |
Dave I believe that it's mandatory for new engine parts to be fitted as soon as they arrive, ( they can even be fondled-if no one is looking!:eek:)
It's clearly defined in the authoritative " The Gentlemans Guide to being a RevHead" by IM NOTABOGAN :LOL::LOL::LOL: :D ;) |
dave do you know what you wife looks like
seams like you never leave the shed [ man cave ] eheheheheh also that could be a good thing , ; keep the up dates comming rob |
Paint has arrived, guess what I will be doing all weekend.
|
|
I think we would all rather be bolting on nice new shiney engine bits than sanding.....
It's all starting to come together Dave. I don't envy your weekend, but you know it will be worth it in the end. :) |
Sanding is very therapeutic ...you get to think about other stuff whilst you are doing it. Then it gets dangerous when all those thoughts turn into plans and projects and you are still sanding and expanding on those new 'brilliant' ideas !
I like to sand ! |
Tonights progress.
http://i270.photobucket.com/albums/j...photo-1511.jpg And with 3 coats of 2K primer Hi Fill. http://i270.photobucket.com/albums/j...photo-2184.jpg Wet sanding tomorrow, prediction is for 42 degrees and a good chance of rain. Does not feel like any chance of rain, so dry and hot. |
Lookin' good Dave, George will be kicking up his heels in no time the way your going mate ;)
|
Dave,
While your in the shed tonight, could you do me a favour and run a tape measure across the fan diameter on your twin system, I cant find any details on Finishline, Much appreciated, DaveW |
Will do Dave.
Did you also see the fans Phil has fitted to "The Orphan" as the motors looked alot more compact than mine. Although I think mine will look smaller when motors are painted black. |
A very hot weekend out here in the centre.
Saturday arvo I was out in the shed, wet sanding, cleaning, drying, prepsoling etc. Got to this stage before calling it a night and taking Ronda out for dinner with Chinese new year. Looks nice and low here. http://i270.photobucket.com/albums/j.../photo-842.jpg Masked up early this morning and squirted color on. http://i270.photobucket.com/albums/j.../photo-667.jpg http://i270.photobucket.com/albums/j...oto-1731-1.jpg http://i270.photobucket.com/albums/j...photo-1507.jpg http://i270.photobucket.com/albums/j.../photo-752.jpg http://i270.photobucket.com/albums/j...photo-1323.jpg Had to go up town this morning and do some work, also grabbed some gloss black enamel to paint engine cradle and suspension parts. By the time I got home, it is just too hot in the shed, so I reco'd the cluster till the heat drops out a bit (Gotta be mid 40's right now). http://i270.photobucket.com/albums/j.../photo-958.jpg And all cleaned up, with repainted needles. http://i270.photobucket.com/albums/j.../photo-203.jpg |
Looks fantastic,
Great work. Phil |
David
Absolutely fantastic looking job so far. Looking forward to each new development. The big red engine will look great in the coloured up engine bay. With the amount of work you are doing, it will be as good as new. Will you reset the odo? Will give you a clear record of the miles travelled since *new*. Geof |
looking great, nice one Dave!
|
Cheers Guys.
I did think about winding back the speedo, but the 89 thousand displayed is the actual Miles it has traveled, so decided to leave that as is. I have painted the K frame, pulleys oil pipes etc tonight, it was just too hot through the day. Also fitted little bits and pieces on the motor (coil, hoses, blanking vacuum bungs, PCV hoses, vac advance hoses) Dave W, the fans are 9 inches across the fan face. |
I did not realise that 6 cyl and V8 alternators are different, so I will see my sparky mate and see if he can swap out front housing or supply a new correct alt.
I restocked the fridge. http://i270.photobucket.com/albums/j...photo-1448.jpg After that important task, I got stuck into making a strong bench to sit the engine and box on to slip under George when he is on the hoist. My welding skills are improving. http://i270.photobucket.com/albums/j...photo-1195.jpg http://i270.photobucket.com/albums/j...photo-2286.jpg I finished that on Friday night, then started to sort out pulleys, it must have been getting late as I just could not think clearly (pre beer). Anyway I walked away for a while and figured I would sort out the accelerator cable bracket. http://i270.photobucket.com/albums/j...photo-1463.jpg Then came back to the pulley and realised I had forgotten a pulley spacer. So then it was beer time. http://i270.photobucket.com/albums/j...photo-1432.jpg Into it again this morning, got the pulleys on, and fitted mounts etc and K frame, up onto new trolley, fitted the gearbox and cross member. http://i270.photobucket.com/albums/j...photo-2125.jpg Then adjusted the heights so the K frame base and rear cross member mounts are in correct relation to George on the hoist, fitted the extractors, and as is typical, tightening the very last stud, it snapped. So R/H header off (glad it happened on the bench and not when I was trying to fit headers with engine already in), drilled out stud and retapped, refitted header and the time had ome, time to mate these together for the first time. http://i270.photobucket.com/albums/j.../photo-333.jpg Snug as a bug in a rug. http://i270.photobucket.com/albums/j...photo-1706.jpg Called it a night early today (sore feet) and had a good clean up, got the mounts all in, fuel line fitted, tailshaft fitted, so Dave is a happy boy. Tomorrow is cleaning suspension parts and refitting them. |
Great stuff, it looks so happy shiny and fresh.
George will be sporting a proud smiling grille while he drags your toys around. You really show what can be done in a short time when you're keen and motivated, makes me feel guilty frankly lol. Keep up the effort Dave. |
Fantastic work. Good to see you have Tasmania's Finest there, I was going to say WTF is the XXXX doing taking up valuable fridge space?!?!?!?!
|
| All times are GMT -7. The time now is 03:23 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: