The LS1 to LS7 Engine Bay idea thread

[Gav]

The VCM Suite VZ OTR was what I fitted.
I can't find any pics (nor can be bothered dicking about with picture sizes to upload them here!!) but it was a straight forward fit, but with mine I needed to trim the radiator down by about 50mm.
The OTR requires a space about 50mm high and 70mm wide to fit over your radiator.
The stock IAT sensor fits into a port on the side.
It DEFINITLY makes a huge difference in performance, the under bonnet temps on mine where upward of 80degC during a drive, and higher when the thermo fans kicked in.
Probably the best bang for buck mod with a LS cobra.

[HSVREDSLED]

Originally Posted by Gav

The VCM Suite VZ OTR was what I fitted.
I can't find any pics (nor can be bothered dicking about with picture sizes to upload them here!!) but it was a straight forward fit, but with mine I needed to trim the radiator down by about 50mm.
The OTR requires a space about 50mm high and 70mm wide to fit over your radiator.
The stock IAT sensor fits into a port on the side.
It DEFINITLY makes a huge difference in performance, the under bonnet temps on mine where upward of 80degC during a drive, and higher when the thermo fans kicked in.
Probably the best bang for buck mod with a LS cobra.

No problems Gav, I know what the VCM one looks like so need for pics. As for the IAT, I just couldn't see one in the images of the stainless OTR.

And yes, I agree....bang for buck..great mod!