forum newbie

[damage]

Ok cool that's where it was in my Harrison I wasnt sure if it was still the same. I just didn't want to loose the billet Kirkham steering wheel centre.

Warren who did you use for your compliance.

[Wazza]

Originally Posted by damage

Ok cool that's where it was in my Harrison I wasnt sure if it was still the same. I just didn't want to loose the billet Kirkham steering wheel centre.

Warren who did you use for your compliance.

Ray Cross .....near Lismore,
He's probably done over 100 Cobras over the years.
Cheers,
Warren

[damage]

Cool thanks

[damage]

Originally Posted by Wazza

Ray Cross .....near Lismore,
He's probably done over 100 Cobras over the years.
Cheers,
Warren

Warren,

Do you have a rough idea of what he charges and does he do all certifications required to register like the IMO240 cert etc.

Is there a checklist or something that I can get to cross check that I have everything done.

[Wazza]

Originally Posted by damage

Warren,

Do you have a rough idea of what he charges and does he do all certifications required to register like the IMO240 cert etc.

Is there a checklist or something that I can get to cross check that I have everything done.

P.M. sent with contact details for Ray Cross.

He should be able to help you with all of your requirements.

Cheers,
Warren.

[spookypt]

Damage, I have recently been using DB Autotech Mod Plate Compliance in Brisbane for some QLD Transport compliance work and they are great if Rays busy etc.

He's familiar with Cobras, Clubmans, Daytona's and 40's.

He's not cheap though....as I expect most aren't.

Spookypt