01-21-2005, 06:14 PM
|
|
CC Member
|
|
|
Join Date: May 2002
Location: Brisbane Australia,
QLD
Cobra Make, Engine: RMC under re-construction, GenIV with tremec 600, Jag 3.31 L/S diff
Posts: 3,318
|
|
Not Ranked
To follow on from Thomas Gayer's post. I did add relays for the radiator fan and used the painless fan switch circuit to switch the relays and I would use the aircon compressor switch circuit to switch relays for an elec fuel pump.
The only relay supplied with the kit was for the horn.
I did have to add a few little bits of wire to existing curcuits. Like the side indicators we have to have in Aussie land...this was just splicing a short pigtail to the existing indicator wire.
Ohhhh...the only real addition was a circuit for the windscreen washer.....but that was easy. I just fed that from the painless supplied wiper cuircuit which is heavy enough to feed the BMC wiper motor but you might want to add a wiper relay to save your switches.
__________________
It's impossible to soar like an eagle when you're surrounded by turkeys.
|
Hybrid Mode
