VDO Tacho Wiring

[Stuart]

Hi All

I was hoping someone could help me out with a wiring question. I purchased my instruments from G-Force and unfortunately the tacho did not come with any wiring diagrams. I have all other gauges functioning properly but need some help with the meaning of markings next to the four terminals on the tacho
I hope I have this correct, the markings are:
W G 24 -

I have one wire from the ECU that is meant to be for the tacho, I have tried connecting this wire to all the terminals with the engine running but one of the terminal caused the the motor to stall, so before I ended up letting smoke out of one of the major components I would ask the forum for help.

Thanks in advance
Stuart

[Rebel1]

Stuart, send me an email to:
rebel3 at powerup dot com dot au

at = @
dot = .

And I'll send you back a scan of the install wiring
Cheers

edit...lower case r on rebel

[Rebel1]

Stewart, seems powerup has smtp server probs.

I'll keep trying

Cheers

[Rebel1]

You should have it now mate.

Tell me if any problems.

Cheers

[Stuart]

Thanks Les it arrived no problem

[BMK]

Stuart

If you still have problems talk to either Roger or Ian Howard at Howard Instruments the VDO dealers in Heidelberg, Victoria.

Bernie