03-08-2007, 06:59 PM
|
CC Member
|
|
|
Join Date: May 2002
Location: Brisbane Australia,
QLD
Cobra Make, Engine: RMC under re-construction, GenIV with tremec 600, Jag 3.31 L/S diff
Posts: 3,318
|
|
Not Ranked
Quote:
Originally Posted by spookypt
Guys a favour... For those of you that have Halibrand replicas and still use the normal 5 stud bolt pattern with the fake spinner I need some info.
(1) What is the internal dimension of the hole in the rim centre that the spinner mount slides through?
(2) How far does the spinner protrude from the screw up rim face?
(3) What brand of Halibrand replica?
Don't ask why gents as this stage... But I have an idea....
SpookyPT
From memory the Dragway spinners sit out 45mm from teh bolt up face BUt the internal diameter I don't know..
|
1. 70mm
2. what do you mean by "screw up rim face?(33mm is thickness of spinner)
3. Oz-Wheels
63mm from Hub face to outside face against which the spinner fits.
__________________
It's impossible to soar like an eagle when you're surrounded by turkeys.
Last edited by Rebel1; 03-08-2007 at 07:11 PM..
|