Well it's been 5 years since I tinkered with cars and in that time I've had three house moves and slowly sold off most of my gear. I'm left with the trusty red tool box containing not much more than a Repco socket set and a few screwdrivers and other basic tools.
The Cobra is a bit of a unique project to work on, being much lower, more compact and fibreglass bodied (until I can afford a aluminium bodied Kirkham
). The chassis/body doesn't arrive for about 4 months so I'm going to spend the time getting the right tools together and I'd appreciate any suggestions. So far I've come up with the following...
To cut holes in the body for lights, vents, etc - a long list that I'd like to narrow down: dremel with reinf. cutter, roto zip, die grinder, sabre blade, air body saw, hacksaw?
Jack/stands: I like this low profile jack but is it overkill?
http://cgi.ebay.com.au/ws/eBayISAPI....MakeTrack=true
Electrical - multimeter, cutters, crimpers, etc.
Air compressor, dust blower, etc.
Flaring tools for brake/fuel lines.
This isn't meant to be a comprehensive list, mainly to get an idea about essential items and build that into the budget. Thanks in advance folks!
Tools for the Cobra build
Threaded Mode
