
07-23-2013, 09:50 PM
|
 |
CC Member
|
|
|
Join Date: Jan 2007
Location: Melbourne,
VIC
Cobra Make, Engine: Harrison, 6.0L Chev
Posts: 2,513
|
|
Not Ranked
Harrison setup
I'm taking my Cobra to a proper suspension place after the local Bridgestone misaligned the IRS on the passenger side, causing the coilover to rub through a CV boot - don't get me started on that!
Just after some thoughts on what I'll call "aggressive street" settings, not full blown race as the car will spend 99% of the time on the road. Happy to cop a bit of extra tyre wear as it does so few kms.
After they correct any excessive bump steer, here's what I'm thinking:
Front camber -1.5
Front castor +6 (power rack)
Front toe in 1.5mm (3mm combined)
Rear camber -1.0
Rear toe in 1mm (2mm combined)
Does that sound pretty right for a Harrison?
__________________
"A spectacularly fast car in a grand if dated tradition."
|