01-14-2009, 04:29 AM
|
 |
CC Member
|
|
|
Join Date: Jul 2004
Location: Ipswich,
QLD
Cobra Make, Engine: Harrison Cobra, SC540 Roadster
Posts: 359
|
|
Not Ranked
Copycat cars developed the kit and made a number of kits(mine is chassis 007)before DRB took over the production of the kits.
It was my suggestion to lower the floor. I cut out the area I wanted to be lowered and copycat cars welded in the new floor section. This had the flow on effect of reducing the room under the car for the mufflers.
The air bag sensors are removed, but the air bags and air bag computer are still in the car. The air bag computer needs to wired into the harness as it communicates to the other computers in the car. If there is no communication from any of the 5 or so computers the signal to start is inhibited.
The air bags needs to have voltage to start the chemical reaction that produces the gas to inflate the airbags. At this stage I am going to short the positive and negative wires to together to stop any chance of them going off. I would rather remove the device that makes the gas, but I can't find any one that works on air bags.
Warren
|
1Likes
Hybrid Mode
