gen 3 t/bodys

[boxhead]

Originally Posted by ledge

Hi Boxhead
Just got of the phone with plums and he gracefully informed me that
you may have the ecm pinouts for me to wire up the OBD11 plug.
I Would much appreciate it if you could let me know.
Plums sounded very excited about my engine combo and i think it is in my best interest to buy the vcm software.

Regards
Paul


Hi Plums
Thanks for the phone call and info, I will forward the info you require asap.

Regards
Paul

Paul, can I get an email address from you?

[OZVENOM]

Hi plums will the edit software do all the ls1 ls7 and all the other gm ecu's or is model specific ??
Also have you come across the problem of ls1 electronic t/body being changed for a bigger ls7 and not being compatable with the original ecu aparently they have different elctronics and the ecu is programed different.
is there an adaptor box to get around this problem.
one of our club members that i fitted a ls1 to his cobra has now bought a bigger t/body and manifold. but it will not talk to his ecu. I was just going to rero fit the driver motor to the bigger t/body.
with all the gm engines going in various cars i was thinking about getting the edit soft ware to help with set up and getting them going i am not realy interested in tunig them as i dont have a dyno but i have a motec plm.
for road tuning which realy gets road maners sorted.
oz.

[ledge]

Hi Oz
This is the software Plums has informed me is the one to have
http://www.vcm-suite.com.au/main.html
It says what engines it can do on the products page.
quite a few actually,
By what i have been told you get 8 credits with the software and that should tune about 2 engines, A pro like Plums may do 3 or 4.
It can do V6 etc

It is just under 1300 right now but it changes with the us dollar.
Should get mine middle of the week, WOO HOO
Hope this helps
Regards
Paul