Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Petrol Filler Pipe (http://www.clubcobra.com/forums/australian-cobra-club/95041-petrol-filler-pipe.html)

stumpeater 02-28-2009 01:10 AM

Thanks Guys, most informative, as usual, Interesting about the Silicon hose being incompatible with Petrol! I will have to get an off cut and watch the reaction, I notice in some of the pics that there are earth straps, but whilst wandering around the wreckers didn't notice any on factory cars, even those that were isolated from the body by rubber fittings. "why is it so?" Peter

400TT 02-28-2009 01:40 AM

Just a heads up that the requirements actually dictate the use of Neoprene hose for the fuel filler.

By the looks of it most here have used the correct hose material.

Beejay 03-01-2009 04:43 AM

I found a few sources of fuel proof hose, but only the stuff from Earls was flexible enough to work in my situation.

Very expensive stuff!

Ben

Baz 03-01-2009 07:23 PM

Quote:

Originally Posted by WKB (Post 924752)
I measured the angle of the steel pipe and it was around 45 -50 degrees. The unleaded adaptor fitted in the end of the pipe and then tig welded.

Baz,
A local spare parts store sells 2inch rubber filler pipe. It is part of the Auto One chain of auto part outlets, so if you have an Auto One store in your area or even Repco give them a try. The hose you require is called filler hose. One store tried to sell me fuel resistance hose. In the larger size hose it had a wall thickness of around 8mm and was extremly rigid.

As we on the subject of rubber filler hose I am finding it difficult finding 1 1/2 inch filler hose. I am after suggetions for this as well.

Thanks Warren,

I picked up the hose at Auto One this morning. Everything is falling in to place.

Baz

Dimi 03-02-2009 05:14 PM

Hi all

On my car the one thing that came to light after a period of time was that all the fuel hoses, even though they were rated for fuel, began to leach fuel vapour through the rubber.

Any hoses, fuel or breathers, either in the cabin or boot would be advisable to be run in teflon lined hoses to avoid the smell.

I had to go to the trouble of changing all my breather hoses in my GT40 as the smell of the vapour became unbearable.

Since changing them to stainless braided teflon no further problems.

Dimi

400TT 03-02-2009 08:11 PM

Dimi, I certainly agree, for standard fuel lines, leaching is a big issue. We've found some hose that does it and some that does not. Same goes for braided line. Seems the better quality more expensive hose does not do it.

Seems to all come back to the rubber component in the line and the exact compound used.

As you say all the Teflon lined stuff should fix the problem.

Boats also have the same issue.


All times are GMT -7. The time now is 02:51 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: