Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Hardtops (http://www.clubcobra.com/forums/australian-cobra-club/97582-hardtops.html)

sambo 06-25-2009 04:05 AM

Merv the finish on that black Cobra is superb. I like the stepped moulding around the edges of the hard top. Do you think it's for strength or just cosmetic? Eg, above the side windows.

Rebel1 06-25-2009 04:31 AM

By the way Merv, The over center cam lock things are available from most boat chandlery stores.

Here is BIAS marine's range: http://www.biasboating.com.au/c-281-...fasteners.aspx

Merv and Sharon 06-25-2009 05:44 AM

Yes Les those hatch fasteners look the part! Not sure Sambo if the moulding stiffens the edges or not but it does add something to the hardtop in appearance. I think that hardtop looks great.

Merv

cameron02 06-29-2009 01:53 AM

hartop
 
Hi Merv
Look in my gallery and you will see plenty of pics of my DRB hardtop. Because I ordered it with my kit the good people at DRB fitted it for me:). I believe that the front section that fits to the windscreen was orininally a seperate section which is fixed into position after test fitting it to the screen.

Merv and Sharon 06-29-2009 03:53 AM

Thanks Cameron. There are lots there now! Hope to get started in a month or so with Steve.

Cheers,

Merv

spookypt 03-15-2010 01:05 AM

hard top
 
Something new.......... %/http://www.clubcobra.com/photopost/d...92642_n_1_.jpg

Merv and Sharon 03-15-2010 09:53 PM

Nice one. I wish we could get those Le Mans-type tops in Australia. With all the rain up here they could be handy.

Towmaster 03-16-2010 05:29 AM

Cameron has sold his Superformance but if you look on his profile there should be some photos of the hardtop.

68 Fastback 03-16-2010 11:10 AM

How do the hardtops attach?

"Q" 03-16-2010 01:51 PM

Hard Tops
 
4 Attachment(s)
Hi Merv and Sharon
Here is some pics of a couple of slightly different to the norm Hard Tops. Hope some work for you.

http://www.clubcobra.com/forums/pict...pictureid=2773

Merv and Sharon 03-17-2010 04:57 AM

Thanks Q - few there I hadn't seen before. This project is on hold now as I got a soft top and the hardtop mould for my Cobra body type is undergoing some minor repairs. We are still going to do some however.

Merv and Sharon 10-11-2011 04:23 AM

It has started ... first one out of the mould (CR/Harrison).

http://www.clubcobra.com/photopost/d.../Hardtop_3.jpg

stephen low 10-11-2011 04:32 AM

Makes it look like Darth Vader!

Merv and Sharon 10-11-2011 04:57 AM

Steve likes black gel coat


All times are GMT -7. The time now is 04:41 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: