Garage floor options

[PCC]

Until you drop something on the tiles and they crack.

If you've got heaps of money then go with any of the above options.

If its a case that you just don't want dust then simply seal it.

There's plenty of proprietary products on the market with a wide range of colours.

Simply degrease the existing surface (wash it), acid etch it (diluted acid) and then wash again. Once dry seal it.

[Heidelberg]

Thanks Mando....Might be better to wait until the weather warms up a bit then!!

Regards.....Paul

[Donunder]

Razerwire has had problems with RaceDeck coping with his heavy bus but it's easily capable of supporting a normal car's weight.

Don't know about the cost in Aus, but have a read here: http://www.racedeck.com/acc.html

I've seen some really nice RaceDeck floors but for mine I'd still be inclined to go the etch/seal route, being sure to give plenty of time between the various processing stages and again before use.

[PCC]

Paul,

Bondall's fine or may be something like Aquaseal by Nuplex.

Mando's spot on with the dry comment. It must be bone dry otherwise you'll get peeling issues.

Its a job you can do yourself as long as you follow the instructions to the letter.

Good luck mate