Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   ADR 15 - Demisting of Windscreen (http://www.clubcobra.com/forums/australian-cobra-club/99483-adr-15-demisting-windscreen.html)

sambo 09-15-2009 05:15 PM
Quote:
Originally Posted by schipps (Post 981500)
Paul,

I can personally vouch for Jeremy at Speedy Air Spares as he is a Bundaberg local. I got my unit there and in the Harrison, the unit fits nicely on the rails behind the dash.
http://speedyairspares.com.au/produc...let-10-16.html
Mick, I got my heater from Speedy yesterday and it looks like a good little unit. Which way did you mount it? Outlets down, to the left, or...? Did you use their 50mm duct and demister vents?

schipps 09-16-2009 02:14 PM
Quote:
Originally Posted by sambo (Post 983796)
Mick, I got my heater from Speedy yesterday and it looks like a good little unit. Which way did you mount it? Outlets down, to the left, or...? Did you use their 50mm duct and demister vents?
Paul,


here is a pic of the unit mounted between the rails. Outlets point toward the drivers side.

http://www.clubcobra.com/photopost/d...m/P1010737.jpg

http://www.clubcobra.com/photopost/d...m/P1010738.jpg

The outlets are both 44mm
hope this helps

regards

Mick

Merv and Sharon 09-16-2009 03:12 PM
Very neat Mick! Fits well too in the Harrison.

Merv

sambo 09-16-2009 04:32 PM
Thanks Mick. Yeah Jeremy said the 50mm duct (smallest he has) can be made to fit by wrapping foam around the outlets to bulk them up. The wire inside the duct can also be shaped to narrow the diameter where it connects up.

What's the white ducting for in your photo? Seems a little big for that demister!

schipps 09-17-2009 01:01 AM
ducting
 
Paul,

the 3 inch ducting you see in the photo is from the 3 inch fibreglass feeder to the chrome demisters on the dash that direct air to the windscreen. I have to narrow the 3 inch down to the 2 x 44mm outlets on the demister unit.

regards

Mick


All times are GMT -7. The time now is 04:11 PM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: