Started...

[ebiggs1]

I picked up the kit and got home with a lot of parts and boxes. It is almost overwhelming. I am dissappointed in the manual and there is no parts list. The manual covers a donor build and I got the tublar upgrade with disc brakes and 9" rear end. I attendened two of the Factory Five "Two Day Build"s and their manual is great. I am missing all the front brake parts. I called B&B Monday mornig and have not gotten a responce yet. Bryan is out of town so maybe they are a little behind.
What I have assembled so far has been very good.

[Jim Werth]

I think I used my manual just for the part number for the hoses and a couple other small thing. If you have any ?s just ask. Jim

[pmfranke]

The fun never ends(you will be calling them once a week) but this is the place to find alot of info.Use the CC search button.I used the CD's pictures more than the man. My biggest boo boo was mounting the body too soon (and in b and b's holes) ,so remember you have to shim and pull the body for a good fit on the doors , for ride height and wheel clearance(Centering over the frame)before mounting the body permnently . If you have the time could you measure the front coil over springs you have ID top and bot and over all length? thanks ,peter

[pmfranke]

just looked at your picks ,never mind about the spring measurment. i see they are allready installed .P.S.there is a steering column gasket look for it .the steering column is not SS and will rust if not sealed.

[preguess]

I got direct answers from Ron at B&B, and Karen has allott of answers also!

[ebiggs1]

Thanx everyone. I found the front brake hardware in the box that has the front and rear chrome bumpers in it. Kinda strange place but I am glad I have it. Still no call and no front calipers.